You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
184<br />
Getting Started with CreativeStudio<br />
5.13 Quick Ref Restart<br />
Feature: Restart<br />
Restarts are needed for a variety of reasons. Either the thread break sensor stops the<br />
machine or the machine is stopped by the quilter or an obstacle.<br />
1A. Thread Break: If the machine stopped because it detected a thread break, the pop-up<br />
box offers an 'Auto Restart' option, so press that button. The machine head moves to<br />
where CS detected the thread break.<br />
1B. Manual Stop: If the machine was stopped for any other reason, click the Restart<br />
Quilting Icon. The sewing head goes back to the spot where it detected the ‘Stop’<br />
command.<br />
2. CS asks if you want to confirm or move the Restart Point. If the stitcher is close to the<br />
right spot, use Back and/or Forward to move the sewing head 7 stitches at a time until the<br />
sewing head is positioned properly. Press Quilt when ready, and continue to sew.<br />
3. Because there is a delay between the thread breaking and the sensor stopping the<br />
machine, the Restart Point probably needs to be moved. Press “PickNewPoint” to release<br />
the sewing head so you can move it to a different spot. The new point can be identified<br />
using the stitcher or the computer screen.<br />
3A. To find the restart point using the sewing head - move the machine until the needle is<br />
just above the point where you want to continue stitching. Press “Use This Pt” on the<br />
keypad. CS moves to the closest stitch and waits for another response. If it looks good,<br />
Press Quilt and continue to sew. If not, try again by pressing “Use This Pt” until the right<br />
spot is found.<br />
3B. To find the restart point using the computer screen - look at the image on the screen<br />
and find the crosshair mark - it is a long, skinny blue plus “+” sign. Zoom in and out using the<br />
roller on the mouse. Find the spot on the screen that corresponds to the restart point on the<br />
quilt, and click that spot with the mouse. The blue crosshair will move to this location on the<br />
screen and the stitcher will move to that location on the quilt.<br />
4. When ready, press Quilt, and continue to sew.<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
Statler Stitcher® is a registered trademark of <strong>Gammill</strong>, Inc.<br />
CreativeStudio is a trademark of <strong>Gammill</strong>, Inc
Change language