download PDF - Gammill

More documents

Recommendations

Info

44 Getting Started with CreativeStudio project file. This project name is not the same as the project’s FILE name (which includes that goofy file extension; .proj or .projx) The remaining General Settings have values that are inherited from the default settings 157 (on the configuration form). If any setting is changed here, all patterns selected for this project after the change will use the new setting. Stitches per Inch (SPI) setting will apply to all the patterns selected for the project. Stitching Speed is measured as a percentage of maximum motor speed. '50' means 50% of the maximum speed. Tie Stitches Per Inch is the size of the stitches taken when doing tie-off stitches. Tie Stitches is the number of stitches taken when doing Tie-off knots. Half are taken in the direction of the pattern and the other half are in the opposite direction. Margin is the distance between the stitch lines and the boundary lines. TIP: Tieoff Stitches are tiny stitches taken at the beginning and ending of a line of stitching. By doing this, the threads do not need to be hand knotted or buried with a needle. Just trim them off because the knot secures the threads. Miscellaneous information (like Project Notes) is listed here.
Main Screen Layout Work Area Property Window Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved 45
Page 1 and 2: Getting Started with CreativeStudio
Page 3 and 4: Getting Started with CreativeStudio
Page 5 and 6: Copyright © 2009 Gammill, Inc. | A
Page 7 and 8: Foreword Foreword Gammill, Inc. is
Page 9 and 10: 1 Introduction Introduction Thank y
Page 11 and 12: Introduction Technology Basics Equi
Page 13 and 14: Introduction Technology Basics Term
Page 15 and 16: Introduction Technology Basics Navi
Page 17 and 18: 1.2 Computer Skills Introduction Co
Page 19 and 20: Introduction Computer Skills 'Explo
Page 23 and 24: 1.2.2 'Explore' Files Introduction
Page 27 and 28: Part II
Page 29 and 30: 2.2.1 File Command Main Screen Layo
Page 31 and 32: Main Screen Layout Command Bar Tool
Page 33 and 34: Main Screen Layout Command Bar Help
Page 35 and 36: 2.3 Tool Bar Main Screen Layout Too
Page 37 and 38: Main Screen Layout Tool Bar Edge To
Page 39 and 40: 2.4 Work Area Main Screen Layout Wo
Page 41 and 42: 2.4.2 Preview Area (CAD Screen) Mai
Page 43: 2.4.3.1 Project Details - Yellow Fr
Page 47 and 48: Main Screen Layout Work Area Proper
Page 55 and 56: Main Screen Layout Keypad Window re
Page 57 and 58: Part III
Page 59 and 60: 3.1.1 Origin Point Save your projec
Page 61 and 62: Planning the Quilting Quilt Project
Page 63 and 64: Planning the Quilting Quilt Groups
Page 65 and 66: 3.3.1 Single Block Patterns Plannin
Page 67 and 68: Planning the Quilting Quilt Pattern
Page 83 and 84: Part IV
Page 85 and 86: Quilting the Quilt - Which CS Featu
Page 91 and 92: 4.1.3 Stitch in the Ditch using Poi
Page 95 and 96:
4.2 Phase 2 - Blocks Quilting the Q
Page 97 and 98:
Quilting the Quilt - Which CS Featu
Page 99 and 100:
Steps to follow: 1. Be sure the cor
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
4.3 Phase 3 - Borders Quilting the
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
to the preview area. Quilting the Q
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
pattern makes quilting the sashings
Page 131 and 132:
Page 133 and 134:
4.4 Phase 4 - Backgrounds Quilting
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Quick Reference E2E 4.4.3 E2E Alter
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
4.5 Record Mode Quilting the Quilt
Page 153 and 154:
4.6 Restart Quilting the Quilt - Wh
Page 155 and 156:
Page 157 and 158:
4.7 Utility Functions Quilting the
Page 159 and 160:
Page 161 and 162:
4.7.3 Oil Stitcher Routine Quilting
Page 163 and 164:
5 Quick Reference Sheets 5.1 QuickR
Page 165 and 166:
5.2 Quick Ref Regulated Quick Refer
Page 167 and 168:
5.3 Quick Ref P2P Line Quick Refere
Page 169 and 170:
5.4 Quick Ref P2P Pattern Quick Ref
Page 171 and 172:
5.5 Quick Ref Single Block Quick Re
Page 173 and 174:
5.6 Quick Ref Composite Blocks Quic
Page 175 and 176:
5.7 Quick Ref Text Blocks Feature:
Page 177 and 178:
Quick Reference Sheets Quick Ref Bo
Page 179 and 180:
5.10 Quick Ref Trim Outside Quick R
Page 181 and 182:
if you don’t like it, change it n
Page 183 and 184:
5.12 Quick Ref Record Quick Referen
Page 185 and 186:
Index - A - Active Screen 56 Add Pa
Page 187 and 188:
File Extension File Extension 17 Fi
Page 189 and 190:
P2P Icon 128 P2P patterns 128 P2P S
Page 191 and 192:
Restart with mouse 153, 155 Re-stit
Page 193 and 194:
Turning the quilt 111 Mark center p
Page 195:
Back Cover
show all

download PDF - Gammill

Create successful ePaper yourself

Delete template?

Save as template?