Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
122<br />
Getting Started with CreativeStudio<br />
direction you will be stitching because the measure process will also determine the<br />
square-up angle of the border. Write down these numbers on the diagram for use<br />
later.<br />
4. Reference boundaries 96 are optional but very helpful because they will show (in<br />
the preview area) any curvature in the seamlines. The Corner Square patterns are<br />
usually done before the borders are stitched. The corner blocks are often defined<br />
with outlining or SID 91 so do this if desired.<br />
5. Click on Repeat Patterns 98 icon. CS asks for a Reference point.<br />
6. Change the repeat settings:<br />
* Change the Total Width to your measurement and CS will calculate the number of<br />
repeats needed.<br />
* Change the Square Up Quilt Angle, using the angle rotation number from the width<br />
measurement.<br />
Tip: Sometimes it is a good idea to repeat the Measure step to get<br />
the Square Up Angle, especially if the quilt has been tightened or<br />
adjusted in any way..<br />
7. Choose a Reference point 100<br />
.<br />
* Move the machine head to that reference point and press OK to set it. CS moves<br />
the pattern(s) to the area anchored by the reference point. The position of the<br />
pattern repeats can be changed easily, using the reference boundaries as the<br />
guide.
Change language