Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Quilting the Quilt - Which CS Feature To use<br />
Phase 3 - Borders<br />
Borders with Custom Corners<br />
3. Measure 71 the top border width next, starting at the endpoint of the left corner,<br />
ending at the startpoint of the right corner (knot to knot). Be sure to measure in the<br />
direction you will be stitching because the measure process will also determine the<br />
square-up angle of the border. Write down these numbers on the diagram for use<br />
later.<br />
5. Click on Repeat Patterns 98 icon. CS asks for a Reference point.<br />
6. Change the repeat settings.<br />
* Change Start End Controlled to = ON. CS will measure the width between the<br />
Startpoint and Endpoint instead of using the outside edges of the pattern.<br />
* Change the Total Width to your measurement and CS will calculate the number of<br />
repeats needed.<br />
* Change the Square Up Quilt Angle, using the angle rotation number from the width<br />
measurement. Both of these changes can be done by transferring measurement<br />
iff the last thing measured was the width, from the endpoint of the left corner to<br />
the startpoint of the right corner.<br />
7. Choose a Reference point. 100<br />
* Move the machine head to that reference point and press OK to set it. CS moves<br />
the pattern(s) to the area anchored by the reference point. The position of the<br />
pattern repeats can be changed easily, using the reference boundaries as the<br />
guide.<br />
8. Change the pattern size (in Pattern Details 99 ) and/or repeats (in Repeat Setting<br />
Details 99<br />
) if needed.<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
125
Change language