download PDF - Gammill

114
Getting Started with CreativeStudio
Corner Types:
* "L" shaped corners extend past the corner into the border area.
* Square corners have the top upright and the bottom upside down.
* Square oriented corners are rotated in 90 degree increments.
* Angled corners are angled toward the inside at each of the four corners.
4. CS moves the corner pattern into the preview area.
If adjustments are needed, click on the pattern to select it (pink) and then resize
and/or repositioned as needed. Don't forget to save the project 60
.
Tip: It is fine to stitch the two corner patterns first IF you are
sure that the repeat pattern for the border area will fit without
further corner adjustments. A safer method is to add the images of
the repeated border patterns into the preview area to see how they
fit. Then you can stitch the corners.
Tip: If you decide you don't like the corner pattern and want to try
something else, just highlight the new corner pattern, click Pattern to
Boundary icon, and CS will switch the patterns.