download PDF - Gammill

134
Getting Started with CreativeStudio
2. Move the background filler pattern in.
Use Pattern_to_Boundary 96 or Repeat Patterns 98
depending on how
many repeats are needed to fill the area.
This example shows 3 repeats and 2 rows that were nested vertically by -.5". There
is a gap on one side border and an overlap on the other which need to be adjusted.
3. . Select all the patterns together before adjusting the size and position. This
prevents the individual patterns from becoming separated from the whole row. If the
pattern doesn't fit exactly, let it extend past the outer boundary. The excess can be
trimmed off before stitching.
4. Choose Trim Inside.
5. Click on the Trim icon. CS will prompt for a boundary. Use as many
points as needed to define the boundary of the applique.