You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
to the preview area.<br />
Quilting the Quilt - Which CS Feature To use<br />
Phase 3 - Borders<br />
Borders - Butted<br />
6. Change the repeat settings.<br />
* Transfer the border width measurement into the Total Width field, and CS will<br />
calculate the number of repeats needed.<br />
7. Choose a Reference point 100 .<br />
Move the machine head to that reference point and press OK to set it.<br />
CS moves the pattern(s) to the area anchored by the reference point. The position of<br />
the pattern repeats can be changed easily.<br />
8. Edit the size and repeats using the Pattern Details or Repeat Setting Details<br />
first.<br />
When done, Save the project 60 .<br />
9. Make final adjustments 76<br />
in the preview area last.<br />
10. Click on Start_Quilting and CS moves the sewing head & prompts for<br />
bobbin pull-up.<br />
11. At the end of the quilting sequence, you will be prompted to pull up the bobbin<br />
thread and click OK. It doesn't matter how the bobbin thread is pulled up, secured or<br />
trimmed. Just be sure to click OK because it completes this process.<br />
Tip: If the continuous line of the stitching was interrupted by the<br />
re-positioning of the individual pattern placement, CS may do tieoff<br />
stitches between the patterns. However, if the space is less than one<br />
stitch length, there will be no extra tie-off.<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
99 99<br />
117