You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
54<br />
Getting Started with CreativeStudio<br />
noticeable.<br />
Select Registration describes what CS should use as the registration points so the<br />
rows don't get out of alignment when the quilt top is rolled.<br />
Maintain Aspect - is similar to Freeze Aspect for a pattern. 'ON' means CS will avoid<br />
distorting the pattern proportions if at all possible. Some minor distortion may be<br />
necessary to completely fill the quilt space.<br />
2.4.3.5 Inheriting Settings<br />
Tip: If you close the details box, you will not get it back again, so<br />
be sure you are done with editing the Process details.<br />
A word about settings and the level of inheritance of settings.<br />
Level 0: Tech support at Statler Stitcher controls all settings. Period. They do allow<br />
some of the settings to be modified by the users, as follows:<br />
L1: Default settings 157 (that the users can modify) are shown in the<br />
configuration form. A change to the configuration form is permanent going<br />
forward (until you change it again). These changes are not retroactive.<br />
L2: Settings 31 can be changed for the current session (üTools on<br />
command bar).<br />
A change at this level applies to all new activity for the rest of the session.<br />
Changes are not retroactive. Nor are they permanent.<br />
L3 Settings 44 can be changed for a single project. A change at this<br />
level applies to all new activity for that project during the current session.<br />
Changes are not retroactive or permanent but they are saved with the<br />
project so the next time the project is opened, the settings will apply.<br />
L4 Settings 46 can be changed for a single pattern within a project.<br />
A change at this level applies to all new activity for that pattern in that<br />
project during the current session. Changes are not retroactive and don<br />
’t affect other projects but they can be saved with the project.<br />
L5 Settings 48<br />
can be changed for a pattern that has been<br />
selected and is visible in the preview area of the screen. These<br />
changes are not retroactive and have no effect on any other<br />
patterns in the project. These changes will not affect the same<br />
pattern if it is used again in this project in the future . This is the<br />
bottom of the hierarchy.<br />
Settings always cascade forward and down, never backward or up.<br />
2.5 Keypad Window<br />
The Keypad Window shows an image of the six buttons on the sewing head keypad.<br />
Using the keypad reduces the number of times you must walk to the computer and<br />
use the mouse to select an option. To view the keypad image, click on View, then<br />
click on Keypad Window and the image will appear in the CAD screen. This image is<br />
grayed out which means it won't respond to any clicking with the mouse. It is only a