Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
126<br />
Getting Started with CreativeStudio<br />
9. Make final adjustments 76 in the preview area last.<br />
When done, Save the project 60 .<br />
Tip: Be careful when adjusting the repeated patterns. If the<br />
start/end points become separated by more than 1 stitch, CS will<br />
stitch them as if they were individual patterns.<br />
10. Click on Start_Quilting and CS moves the sewing head & prompts for<br />
bobbin pull-up.<br />
11. At the end of the quilting sequence, you will be prompted to pull up the bobbin<br />
thread and click OK. It doesn't matter how the bobbin thread is pulled up, secured or<br />
trimmed. Just be sure to click OK because it completes this process.<br />
Quick Reference Border-Corner<br />
4.3.6 Side Borders<br />
176<br />
Border patterns that are large, open or non-symmetrical can usually be done while<br />
the body of the quilt is being done. A section (or chunk) of both side borders is<br />
stitched every time the quilt top is rolled. Planning is important so the number of<br />
repeats needed for the side borders is known and the target size is set at the<br />
beginning. The last sections (chunks) may need to be adjusted a bit but since the<br />
pattern is large, open or non-symmetrical, this difference won't be noticeable.