You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Quilting the Quilt - Which CS Feature To use<br />
Phase 4 - Backgrounds<br />
Background Fillers using Trim - Inside<br />
6. Click Stop when done and CS will erase everything inside the applique boundary,<br />
leaving the filler pattern in the background. Save the project often. Continue with<br />
additional Trims as needed.<br />
Tip: Multiple "Trim-Inside" boundaries are possible in one quilt<br />
group (but only one "Trim-Outside") so trim until the pattern is<br />
customized to fit the space, even if it takes multiple trims.<br />
When done trimming the applique, trim the outer edges if needed. In this example,<br />
the bottom edge fit well so only the top and sides were trimmed. This is done using<br />
the same Trim-Inside feature, and creating a boundary around the outer edges as<br />
shown. Be sure the boundary around the outer edge covers all of the background<br />
filler. If any of the bubbles peek out, they will be stitched.<br />
7.Save the Project.<br />
60<br />
8. Click on Start_Quilting and CS moves the sewing head to the start of the<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
135
Change language