download PDF - Gammill

176
Getting Started with CreativeStudio
5.8 Quick Ref Borders and Corners
Feature: Borders and Corners
Using Border / Corner and Repeat Patterns features
Steps to follow for corners:
1. Click on the Border_Corner icon. CS prompts for outer border boundaries: Click (UL, UR,
LR, LL corners). CS prompts for Inner border (UL, UR, LR, LL corners).
2. Select the corner pattern and edit the Border Corner settings, choosing a type and
orientation that best fits the corner pattern.
3. Click Pattern to Boundary and CS moves the corner into the preview area. If adjustments
are needed, click the pattern to select it (pink) and then resize and/or repositioned as
needed.
4. Click on Start_Quilting and the sewing head moves to the Start of the first pattern. CS will
prompt for pulling up the bobbin thread and choosing OK when ready to quilt. CS will stitch
the first pattern and move to the next, repeating the prompts for bobbin pull-ups. At the end
of the quilting sequence, you will be prompted to pull up the bobbin thread the last time and
click OK. Be sure to click OK because it completes this process.