download PDF - Gammill

Main Screen Layout
Work Area
Property Window
Stitches per Inch applies to this pattern.
Pattern Speed is measured as a percentage of maximum motor speed. '50' means
50% of the maximum speed.
Tie Stitches Per Inch is the size of the stitches taken when doing tie-off stitches.
Tie Stitches is the number of stitches taken when doing Tie-off knots. Half are taken
in the direction of the pattern and the other half are in the opposite direction.
Pattern Width is the width of one pattern, measured at the widest point.
Pattern Height is the height of one pattern, measured at the tallest point.
Freeze Aspect - 'ON' means the ratio of Height:Width remains the same when the
size changes. So, if one of the dimensions is changed, CS will change the other
automatically to keep the ratio the same. 'OFF' means CS will allow the ratio to
be distorted.
Margin is the closest distance between the stitch lines and the boundary lines.
Misc Project Notes are saved with the project for future reference.
Copyright © 2009 Gammill, Inc. | All Rights Reserved
47