You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.10 Quick Ref Trim Outside<br />
Quick Reference Sheets<br />
Quick Ref Trim Outside<br />
Feature: Trim Pattern - Outside<br />
Assumptions: This assumes that the following preparation steps have been completed.<br />
Prep Step #1. Click on Boundary icon. Define the boundary and finish by pressing Stop.<br />
Prep Step #2. Highlight the pattern to be used.<br />
Prep Step #3. Click on Pattern into Boundary icon. When the boundary is odd shaped, CS<br />
may have trouble automatically resizing the pattern to fit the space. It will generate a<br />
warning message, but still try to resize the pattern.<br />
Prep Step #4. Click on the pattern and resize using the handles until satisfied.<br />
Steps to follow:<br />
1. Click on the pattern image in the preview area to select it (pink).<br />
2. Choose Trim Outside.<br />
3. Click on the Trim icon. CS will prompt for a Trim boundary.<br />
4. Click Stop when done and CS will erase everything outside the boundary.<br />
5. Reposition the pattern image. Click on the pattern(s) to select if needed. Use the<br />
handles (blue) to re-size and reposition the pattern so it aligns to the Trim boundary.<br />
6. Click on Start_Quilting The sewing head will move to the Start of the pattern. CS will<br />
prompt for pulling up the bobbin thread and choosing OK when ready to quilt. At the end of<br />
the quilting sequence, you will be prompted to pull up the bobbin thread and click OK Be<br />
sure to click OK because it completes this process.<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
Statler Stitcher® is a registered trademark of <strong>Gammill</strong>, Inc.<br />
CreativeStudio is a trademark of <strong>Gammill</strong>, Inc<br />
Copyright © 2009 <strong>Gammill</strong>, Inc. | All Rights Reserved<br />
179
Change language