Pipelaying Tender-VOL I - WorleyParsons.com

4.0 CERTIFICATION-QUALITY ASSURANCE AND QUALITY CONTROLAll material and equipment to be permanently incorporated in the project shall beduly quality controlled /inspected and certified for full compliance with the “Laws-Rules-codes and standards “prevailing for the project and as per approvedquality assurance plan.Quality control, inspection and certification shall be as follows:4.1 BASIC PRINCIPLESEquipment vendors and subcontractors must be duly approved ,qualified andcertified for their ability to supply basic materials, assemble, erect, install, testcommission, proceed to composite works and to fabricate the equipmentaccording to the codes and specifications.All basic materials, equipment in addition to shop fabrication anderection/construction shall be subject of 3.1 Certification before leaving the millsIn addition some activities may, as mandatory by law or at the discretion ofOwner/Owner’s representative, be audited and/or subjected to 3.2 certification4.2 QUALITY PLANVendor/Contractor shall, on due time ,establish and submit to approval ofOwner/Owner’s representative a comprehensive Quality Assurance Programand Quality plan stating clearly the organization it proposes to set up and theways it intends to organize the Certifications.4.3 Certifications specific to Hydrocarbon related facilitiesVendor/ Contractor shall assure the certification of its activities or works as wellas of any subcontractors as follows4.3.1 3.1 Certification4.3.2 3.2 CertificationOwner/WORLEYPARSONS reserves the right to nominate one or more TPIA toexecute in its name all inspection and certification it aims necessary or ismandatory by Law.Owner / Owner’s representative may also be nominated to act in name of Ownerfor the purpose and present for specific items or activities; in that case “Owner”shall also mean “Owner’s Representative” in the frame of its “Commitment”.Owner / Owner’s representative’s presence to certification events and / or finalissue of certificates shall in no way reduce the obligation of vendor / contractorfrom it’s duties, obligations and liabilities.Vendor / Contractor shall, in its Quality Assurance Plans (QAP), proposeprocedures to inform Owner / Owner’s Representative, on due time to allow for3.2 Certification.MH2145-C000-PS-RFQ-0020Page 201 of 334