Pipelaying Tender-VOL I - WorleyParsons.com

WAIVER/DEVIATION/EXCEPTION REQUEST’ shall also indicate the costbenefit to the owner.5.5 Inspection test statusInspection test status of products shall be identified by using markings,authorized stamps, tags, route cards, inspection records etc. during the courseof manufacture to clearly indicate acceptance/rejection of tests/stages ofinspection performed during its manufacturing cycle.5.6 Quality RecordsVendor/Contractor shall maintain quality records as per his procedures.Inspection Reports & Test Record copies shall be furnished to Owner / Owner’sRepresentative duly accepted by the TPIA.5.7 Non Conformity Reports (NCR)TPIA will issue a NCR on observing any deviation to Owner / Owner’srepresentative’s technical specifications or approved documents for Owner /Owner’s representative’s approval. On receipt of NCR, the Vendor / Contractorshall submit a detailed corrective action procedure for Owner / Owner’srepresentative’s approval, and shall carryout all necessary corrective action sorequired to the satisfaction of Owner / Owner’s representative/TPIA.5.8 Identification and TraceabilityVendor/Contractor shall establish and maintain a standard written procedure foridentifying the products from applicable drawings, specification or otherdocuments during all stages of production, delivery and installation. A copy ofthis standard procedure shall be made available to Owner/Owner’srepresentative.MH2145-C000-PS-RFQ-0020Page 203 of 334