Manual - AEQ International

• Indication of audio signal type: analogue or digital.• Indication of MONO or STEREO signal.The contextual keys under the display are associated with the three options shown in thebottom line of the screen:• “BACK”: pressing this key allows you to return to the previous menu screen. The gainconfiguration you may have made is saved. You can also return to the previous screenby pressing any of the three associated encoders.• “TONE”: controls the tone generator associated with that physical output. The tonegenerated is 1 KHz. Its activation is identified through the LED of the contextual key. Tomodify its level, you need only to change the output gain associated with that channelfrom the rotary encoder associated with “GAIN” control.• “ROUTE”: this submenu allows you to manage the internal routing of the signals of theconsole toward that output signal or bus. It is displayed as a list of all the inputschannels connected to that output at that moment. By turning the first encoder you cango round the cross-points list. You can activate or deactivate the selected routing bymeans of “ADD” and “DEL” contextual keys and you can modify the cross-point gain(between -99.8dB and +12dB) by turning the third encoder.AEQ CAPITOLUltra-compact digital audio mixer51