Manual - AEQ International

In addition to the signals on channel faders present on the control surface that can be mixed,processed and sent to any output channel, AEQ CAPITOL is capable of routing and adjustingthe levels for other hidden signals. Up to a total of 94x96 audio signals can be routed.Detail of a channel module on the AEQ CAPITOL control surfaceLocated in the upper part of each channel are 2 routing keys (“PROGRAM“ and “AUDITION“)and a “SELECT” button to assign the channel to advanced settings common control (gain,dynamics, EQ and balance).Beneath this section, an OLED display shows channel name and status for balance or pan.Immediately under the display is located the Pre-listen button “CUE”, as well as the “PROCESS”LED that alerts with regards to the activation or changes of equalization, dynamics(compressors and limiters), balance or gain.By pressing the “SELECT” button the advanced configuration functions are enabled. Theseconfigurations are accomplished within the integrated multifunction display in the control andmonitoring section at the far right of the control surface. The operation is accomplished with therotary encoder and graphical menus and short-cut function keys, depending on the informationshown on the display.AEQ CAPITOLUltra-compact digital audio mixer8