Manual - AEQ International

There are two tabs: “General” y “Salvo”.The “General” tab gives you access to a screen identical to the one described in the previoussection and allows you to configure the operational sequence of the programmable key and itsrelationship with the system GPI´s and GPO´s. This way it is possible to execute a Salvo bypressing the programmable key and activating at the same time a GPO or by the remoteactivation of the programmable key through GPI (for this purpose, you must activate the “Push”checkbox).The “Salvo” tab includes specific functions, including a list of actions for each of the crosspointscontrolled by the Salvo and the order of execution (first-up, last-down). There are threebuttons below the list enabling you to configure the list of actions:• “Insert”: allows you to insert the activation or deactivation of a cross-point in the list ofactions from a simple menu:o “Status”:• “Off → On”: the action is executed when the programmable key isactivated.• “On → Off”: the action is executed when the programmable key isdeactivated.o “Order”: allows you to set the position of this action in the general list ofactions.o “Input”: allows you to select the input channel or internal summing bus.o “Output”: allows you to select the output channel or internal summing bus.o “Action”: allows you to select whether the cross-point between “Input” y“Output” is connected (“Connect”) or disconnected (“Disconnect”).• “Modify": allows you to modify a preconfigured action. The options on this screen areidentical to those described for “Insert” option.• “Delete”: allows you to delete a preconfigured action. Confirmation is requested.AEQ CAPITOLUltra-compact digital audio mixer78