Manual - AEQ International

More documents

Recommendations

Info

From left to right and from top to bottom the available options are:• Name of the snapshot (test 1 in the example).• Name of the channel (dig 2 in the example).• “Digital Gain”: allows you to control the output gain of the selected channel from -12dBto +12 dB, by means of a graphical representation of a sliding fader.• “OK”: allows you to accept the created or edited configuration.• “Cancel”: allows you to reject the created or edited configuration. No change you mayhave made is saved.AEQ CAPITOLUltra-compact digital audio mixer96
4.4. “Firmware Upgrade” menu.This menu allows you to update the firmware versions for the AEQ CAPITOL, allowing for theimplementation of new features and developments in future versions. Clicking on the “FirmwareUpgrade” section on the main screen, the left side of the screen will show you the list ofsubmenus, which includes:• “Tree View”: provides a global view of the system, providing information regarding thecurrently installed firmware versions for each of the integrated and optional modulesthat AEQ CAPITOL mixing console contains.• “Upgrade View”: shows information regarding the system functional module to beupdated and the overall progress of the Firmware Upgrade operation.• “Log View”: log containing all the actions associated with an upgrade process.IMPORTANT NOTE: Any operation in this “Firmware Upgrade” section should only beaccomplished by qualified personnel in possession of all necessary technical informationrelative to this system and with the possibility to establish a direct communication with AEQ'stechnical support (sat@aeq.es).In order to execute this menu available options, it is necessary that the Capitol Setupapplication is in direct communication with the AEQ CAPITOL mixer, through its Ethernet port(“LAN”) at the audio engine back panel. In case there is no connection to console, theassociated submenus will be shown blank.4.4.1. “Tree View” submenu.“Tree View” submenu is accessed, from the drop-down menu “Firmware Upgrade”, by clickingon the icon:“Tree View” submenu provides a global view of the system, with a tree structured diagram,providing information regarding the currently installed firmware versions for each of theintegrated and optional modules that AEQ CAPITOL mixing console contains.AEQ CAPITOLUltra-compact digital audio mixer97
Page 5:
Its Ethernet port enables the local
Page 8:
In addition to the signals on chann
Page 12 and 13:
VU metersPROGRAMMABLEKEYSMAINSCREEN
Page 14 and 15:
At most, the last line will have fo
Page 16 and 17:
• The three rotary encoders, from
Page 18 and 19:
2.1.3. Wrist- rest and side trims.A
Page 20 and 21:
2.2.1. Power supply.The power suppl
Page 22 and 23:
• Maximum power: 100mW at 40 ° C
Page 24 and 25:
2.2.2.3. Control and studio monitor
Page 26 and 27:
- Opening the unit.It’s VERY IMPO
Page 28 and 29:
Digital input 4 Digital input 3 Dig
Page 30 and 31:
“ANALOG IN 1-4” connectorPin Si
Page 32 and 33:
MIC/LINE input 4 MIC/LINE input 3 M
Page 34 and 35:
2.2.4.2. CA33 telephone hybrid opti
Page 36 and 37:
3. DESCRIPTION OF THE INTERNAL MENU
Page 38 and 39:
• “CHRONO”: enables you to co
Page 41 and 42:
• “BACK”: pressing this key a
Page 43 and 44:
3.4.3. “SELECT“ menu.This menu
Page 45 and 46: The “Compressor / Limiter” func
Page 47 and 48: In addition, the threshold must be
Page 49 and 50: • In mic/line channels, indicatio
Page 51 and 52: • Indication of audio signal type
Page 53 and 54: Only the users defined as administr
Page 55 and 56: There are two distinct areas in thi
Page 57 and 58: The “Unlock” button allows you
Page 59 and 60: The lower part of the “User Confi
Page 61 and 62: 4.2.1. “Board Configuration” su
Page 63 and 64: o“TH02”: GPI to accept the part
Page 65 and 66: The mixer bus configuration table h
Page 67 and 68: 4.2.3.1. Advanced configuration of
Page 69 and 70: • “Mono”: allows you to defin
Page 71 and 72: 4.2.4.1. “Studio Room Section“.
Page 73 and 74: 4.3. “Programmable Configuration
Page 75 and 76: 4.3.2. “Programmable Keys” subm
Page 77 and 78: • “Latch Mode”: allows you to
Page 79 and 80: 4.3.2.4. Configuration of “Codec
Page 81 and 82: • “On Air GPI”: selects and c
Page 83 and 84: The lower part of the “Programmab
Page 85 and 86: The three buttons at the bottom of
Page 87 and 88: Allows you to scroll to the top of
Page 89 and 90: • “ATTACK TIME”: this is the
Page 91 and 92: 4.3.4.4. Advanced configuration of
Page 93 and 94: The available options in the snapsh
Page 95: From left to right and from top to
Page 99 and 100: In case you select an AFU file that
Page 101 and 102: 5. A.E.Q. GUARANTEE.AEQ warrants th
show all

Manual - AEQ International

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?