Manual - AEQ International

The “Connect” button initiates the communication process between the Capitol Setupapplication and the AEQ CAPITOL Mixer. If the connection is established correctly the 3associated buttons become active and the “Connect” button changes to “Disconnect”(and allows you to end that communication).The associated buttons functions are the following ones:oooo“Read”: allows you to read the configuration currently active in the AEQCAPITOL mixer and download it in the Capitol Setup application.IMPORTANT NOTE: the active configuration at that moment in the applicationis overwrited and get lost (unless you previously save it by means of “Export”option).“Send Configuration”: allows you to send the currently selected configurationto the AEQ CAPITOL mixing console, thus becoming the valid configuration inoperation. The audio will be interrupted a few seconds while the newconfiguration is being activated. During the sending, a bar shows the process. Ifthe process is properly done, the message “Send Configuration: OK” isdisplayed.“Reset”: replaces the currently active configuration on the AEQ CAPITOLmixing console with the configuration stored in the first memory or snapshotdefined (please refer to section 4.3.5 of this manual). The audio will beinterrupted a few seconds while the new configuration is being loaded.“Licenses”: allows you to activate the MADI link function or the “Virtual Capitol”remote control software (this one is not available yet). For both options, youmust purchase a user license.When you press the padlock associated to any of the 2 options, a window willappear allowing you to introduce the key associated to to MADI funtionor the one associated to “Virtual Capitol” application (available in future softwareversions):AEQ CAPITOLUltra-compact digital audio mixer56