Manual - AEQ International

o“TH02”: GPI to accept the particular signalling that is generated bythe AEQ TH-02EX MkII digital hybrid, as well as to enable theremote control of this particular equipment.3. GPO: General Purpose Outputs. AEQ CAPITOL incorporates 8 opto-coupled GPO's onopen collector transistors.The advanced configuration menu of GPOs is accessed by clicking “Click to[CONFIG]” and then clicking again on the “CONFIG” button that will appear. Theconfiguration options are:• Edit the "Label" to identify the assigned role.• Configure the working mode (“Level” column) of each GPO. The options are:o “Level High”: GPO activated on high level.o “Level Low”: GPO activated on low level.o “On Change”: GPO is activated by transitions from high to low orthe inverse.o “Pulse High”: output in the form of a high level pulse with a durationthat is defined in milliseconds in the field “Duration”.o “Pulse Low”: output in the form of a low level pulse with a durationthat is defined in milliseconds in the field “Duration”.4. RELAY: allows you to configure the GPO outputs on physical contact relays asopposed to the opto-coupled GPO's on open collector transistors. There are fourcontact relays or contacts.The advanced configuration menu of GPOs is accessed by clicking “Click to[CONFIG]” and then clicking again on the “CONFIG” button that will appear. Thisconfiguration menu is exactly like the previously detailed for GPOs.AEQ CAPITOLUltra-compact digital audio mixer63