Manual - AEQ International

o LEVEL 0: users with no associated password. The operation is limited toraising and lowering faders, activate/deactivate the 4 routing keys and the CUEkey of each channel, activate/deactivate channels (“CHANNEL ON/OFF”) anduse the programmable keys and monitoring section. It’s not possible to defineusers of this level in the configuration software (you can access to this level inAEQ CAPITOL console by pressing the “LOGOU” contextual key in the initialmenu).o LEVEL 1: these users may perform the same actions as the level 0 users, andcan also activate equalizers and filters, modify audio input channels gains andmodify the signal present in a certain channel. They can’t modify phase andbalance, activate dynamics processes or modify the routing.These users aredefined in the configuration software with “Basic” access level and theindication “BASIC” is shown in the initial screen of the control surface to identifythis level.o LEVEL 2: these users may perform the same actions as the level 1 users, aswell as all the additional operation, configuration and control options that AEQCAPITOL control surface and its associated internal menu offers, except thechange of the IP address of the network port (“LAN”) present in the rear panelof the unit. These users are defined in the configuration software with“Advanced” access level and the indication “ADVAN” is shown in the initialscreen of the control surface to identify this level.o LEVEL 3: this is the highest level in the system, reserved for administrators. Itenables full access to all the equipment menus and configuration options(including the change of the IP address of the network port of the unit), and, inaddition, is the only level enable to access to the configuration software. Thesame password is used in this menu integrated into the control surface and inremote configuration software. These users are defined in the configurationsoftware with “Administrator” access level and the indication “ADMIN” isshown in the initial screen of the control surface to identify this level. Thepassword supplied by default for “ADMIN” user is 1234.• “ID”: internal referente number for each user automatically and sequentially assigned.AEQ CAPITOLUltra-compact digital audio mixer58