Admin Guide - VoIP software provider

LastDialedNum: the called party number of the last call on the simcardLastCallBegin: the date-time of the last call attempt on the simcardLastCallEnd: the date-time of the last call attempt on the simcardEnabled: set to 0 to disable the simcards instead of deleting itTemporarilyDisabled: you can disable the simcard temporarily for maintenance tasks by setting this value to 1DisabledUntil: used for automatic failovering. If the value is above the current time, the simcard is in failovered stateDisabledCause: last disable cause explainedReenabledCount: how many times have the simcard reenabled after a failoverLastReenabled: the date-time of the last reenabling operationTodayCallCount: call attempts from 00:00ThisMonthCallCount: call attempts from the first day of the current monthAllCallCount: all call attempts on the simcard until nowAllWrongCalls: all wrong calls on the simcard until now (speech length below the predefined value)AbsolutePriority: if you set it higher then on other sims, all calls will be routed here primaryPriority: routing priority boostFiltering: determines how we check the blacklist and the known numbers0-no filter: allow all numbers1-allow blacklist „sure” level: 0,1 and 2 (tb_blacklist)2- allow blacklist „sure” level: 0 and 13-allow only blacklist „sure” level: 04-block all blacklist5-allow only known numbers (listed in tb_knowngoodnumbers)6- allow only known numbers that are 100% ok (sure is 1 in tb_knowngoodnumbers)Co_....: fields used by server for fake call and sms simulationsBestDirection: used for automatic simallocationBestPrice: used for automatic simallocationEngineID: the corresponding engine (tb_engines.id)Credit automation related fields:CheckCredit: credit calculation or request/charge operations neededCrequestEnabled: automatic credit request enabled/disabled (1/0)LastCreditRequestTry: the date-time of the last credit request command issued by the serverAllCreditRequestCount: the number of credit requestsLastCreditAnswer: the date-time of the last answer to the credit request commandCreditRequestFails: subsequent failed credit request. Check the credit automation logs if this goes above 3