Admin Guide - VoIP software provider

The routing is blocked if the following conditions are met:General conditionssyntax error in incoming number (or not known)max call/day, max speachlength reached (licensing option)Caller user checkthe traffic sender reached their maximum channelscaller gateway, simcard or simpacket is not enabled or temporarily disabledfailed authorization (wrong originating ip, bad username or password or wrong techprefix)Caller “CanDial” setting is set to falseCaller tb_users.enabledprefixes not match („*‟ allow all numbers)Check if other traffic sender has the same ip/techprefix (caller mismatch)Routingdirection and time don‟t match a routing patternno active device or simpacket from the selected pattern priority listCalled device/gateway checksCalled gateway(s) is not enabled, not active, temporaydisabled, allowedpartners don‟t match or any other problemCalled gateway onlytestcalls not matchCalled gateway enabledprefixes not match („*‟ allow all numbers)Called gateway blockprefixes matchCalled device filtering option doesn‟t allow blacklisted number level (if the incoming number is blacklisted)gateway has testprefix but does not matchCalled simpacket check (only for gsm directions)Packet is not enabledCaller is not listed in allowedpartnerspackets.waitaftercall second not elapsed since last callpackets.filtering. blacklist/whitelist restriction (filtering option doesn‟t allow blacklisted number level (if the incoming number is blacklisted))Simcard check (only for gsm directions)Called simcard(s) is not enabled, temporaydisabled, not ready, allowedpartners don‟t match or any other problem