Admin Guide - VoIP software provider

50: admin60: general adminAddedBy: the user id who have added this user (sales, web registration, etc)Commission: used for sales to define their comission percent from the enduser priceReduction: sales user can give to enduser some percent (substracted from their comission)LateFee: applicable when the user is late paying the invoice costPacketID: billing for users, traffic sendersBillingDay: usually 1 (the first day in every month)Qualification: the importance for the user. From 0 to 10. for example if the user has big priority, then we route its calls to better routesPostpaid: if the user will prepaid or postpaidPaymentMode: Check (0), Bank Tranfer (1), Cash (2), Else (3)ContractNumber: contract for end-usersAllowedpartners:Allowed traffic senders for the gateway, or allowed gateways for traffic senders.A list of user id searated by comma or „*‟Note that parent users will be checked tooEnabledprefixes: can be one prefix (with any length) or a list of prefixes with 3,4 or 5 digit separated by comma.Can be used for trafic senders and gateways too. No need to setup a separate routing pattern if you use this restriction.EnabledTechPrefixes: enabled techprefixes for the specified gateway (3 digit length numbers separated by comma)BlockPrefixes: list of called prefixes that will be blocked for the user (techprefix will not be considered here). Numbers listed here must have 7 digitlength and separated with comma.ContractState: the status of the contract0- Unknown1- Not applicable2 -In Progress3 -Active4 -TerminatedContractComment: additional comment for salesCredit: when postpaid, then we also can set a max amount (which will reset in every month)Enabled: if disabled, it behaves as if it were deletedDomainName: sipproxy domain namePort: signaling portTransIp: secondary signaling ipTransPort: secondary signaling port