Admin Guide - VoIP software provider

‣ totype, toid, topacket, tosimid, togroup‣ fromname, frompattern‣ toname, topattern‣ fromenabled, toenabled‣ fromidlist; toidlist‣ fromsimidstr; tosimidstr‣ fromip, toip‣ fromsimgrouplist, fromusergrouplist‣ tosimgrouplist, tousergrouplist‣ reloadgroups reloadgroups5.79. Request/response target addressBecause the server will try to send the sip messages to all possibile addresses, sometime it will misroute it.With the denyaddr setting you can restrict the address posibilities. It can be set global or user level.The following values are defined:‣ NULL //will load the default denysetting‣ * //allow all‣ loopbackip, loopbackaddr //127.0…, 0…‣ localip, localaddr //locally configured or autodetected ip/port‣ lanip, lanaddr //192.168, 10.0, etc‣ privateip, privateaddr //local + lan‣ notfromip, notfromaddr //the address from where messages are received‣ notsigip, notsigaddr //the address sent in sip signaling‣ specificip, specificaddr //any ip or ip:portExamples:to restrict the target address for a sipuser you don‟t allow local and lan ip: privateipto restrict the target address for a virtserver you don‟t allow: localaddrto restrict a misconfigured proxy wich is always telling you 11.12.13.14: privateip, 11.12.13.14on a virtserver you must deny only the localaddr for the mainserver (wich is configured usually as a sipproxy) and for the operators you can deny privateip