Admin Guide - VoIP software provider

16. allocate numbers in the mainserver for the new virtserver instance (callback numbers)17. start the new virtual server18. make a testcall19. check the logfile for errors. test MAgent. check MManage5.68. Fax detectionUsually you can filter out fax calls by setting the “block711” global setting.5.68. Handling dynamic & private ip/portFor sip proxyes, endusers and gsm gateways the server will handle ip and port changes automatically. For sip proxyes and endusers theip/port/transip/transport settings will be changed dynamically only if the “Can Dial” option is enabled for the device.5.69. Fax settingsfaxhost: email-fax gateway domain name or ipfaxuser: smtp usernamefaxsubject: email subjectfaxfromaddr: from fieldfaxfromname: from name fieldfaxnormalize:0 = leave original number1=normalize2=normalize, no iec3=normalize, with iecfaxsuffix: append after faxnumber (usually @host.domain)5.70. License limitationsYou can configure the limits in the “licensecfg” global config section, but the configured values cannot exceed the builtin hardlimits. Most ofbuiltin hardlimits are listed in the “license” section or you can check them in MManage->help->licensing menu. The -1 value means “no limit”.