Admin Guide - VoIP software provider

For every simpacket you can restrict the maximum allowed reservations by the maxalloc field. (useful to not reserve all channel from the samesimpacket)To setup the channel reservation use the following configuration values (mserver, simplatform config):-reserveforh323: reserve capacity for h323. reservations will be disabled if less than 1-reserveforsip: reserve capacity for sip . reservations will be disabled if less than 1By example if you set the reserveforsip field to 5, you can be sure that 5 channels always remain free to be used by calls received with SIPprotocol (H323 originated calls didn‟t consume all your channels)4.4.13. Number portabilityIf the portednumber table is populated, the server will change the original caller number prefix to the new operator prefix, and will route the callaccordingly.You can set the ported numbers form the MManage “Number Portabilty” form or you can automate the process by programmatically changing thetb_portednumbers database table.You can control the server number portability handling by the “checknumport” global configuration:0=not check1=check for changed prefix2=check for changed number3=check for changed domain4=check allThe fwdtootherdomains must have to be set to at least 1 for domain routing to have effect.tb_portednumbers:id: autoincrement database primary keynumber: original (normalized) called (B) numberproviderpx: new prefix (for example instead of 3630 changed to 3620)newnumber: the changed numbernewdomain: the new service provider ip or domainnewport: service port (defaults to 5060)priority: checked for duplicate numbersdatum: record insertion date