Admin Guide - VoIP software provider

4.2.6. Line MonitorThis is a simple listing of your channels. You can discover all simcard problems by scrolling down this list. (Missing channels are highlighted)4.2.7. Capacity CheckThis module tests the capacity for the predefined direction in priority order.4.2.8. System LoadShows system utilization statistics.4.2.9. Server ConsoleDirect interface to the server command port. Type help to see the available commands. You can connect directly to any gateway interface.Command defined on gateway interface:help show this command listinfo show status and important parameterscmd launch the predefined processexec launch the predefined processfile will send the requested fileshowlog will send the last lines from the requested filetimeset will sent the current timesetini write to config filegetini read from config filedtmf send dtmfftpget load from ftpftpput put file to ftpselfupgrade do a selfupgradegwrestart restart the gateway processpcrestart restart the gateway (hardware)4.2.10. Server MonitorWill connect to the server logport. The trace level depends on configuration (Open the Configuration form, type “log” in the filter box, and hit theenter button. Then you can see all options regarding to log levels)