Admin Guide - VoIP software provider

-2: INFO and RTP DTMF messages will be forwarded and converted to InBand too.-9: don‟t forward INFOsendmonthlyemail: monthly email report for support and adminsMissed by SMS: notify about missed calls by sms. Usually used for endusersMissed by Email: notify about missed calls by email. Usually used for endusersCan watch sim packets: list of packetid separated by comma, used for VPC access. The actual partner can see this simpackets with his VPC accountCan watch users/devices: list of users and gateways id separated by comma, used for VPC access. The actual partner can see this devices with his VPC accountAccess Rights: specify wich fields are allowed for the user in the VPC application0: simcard and traffic sender fields are not shown1: simcard related fields are not shown (simid, packetname)2: traffic sender related fields are not shown (name, username)3: all fields are shownCLI: CLIR and CLIP settings0: forward always (forward asserted as normal number always!). will not hide, even if caller was set so1: normal handling (forward asserted as normal number) -default2: forward as asserted identity always (identityrewrite asserted)3: forward as asserted identity only to trusted domains (identityrewrite asserted)4: normal hide (no idenityrewrite forwarding)5: force hide (no asserted identity too!). always hidedIsOperator: specify if the user is a callcenter operator (1) or a sub-enduser (0) or power enduser (2)Choosecodecs: list of supported rtp payload formats in priority order separated by comma. Only one will be selected. Don‟t set this field to disableselecting only one code.If set, than only one codec will be left in the sdp (plus the dtmf codecs). This will help, when the server answer to invitation with more than one codec in the 200.The client should answer with the final codec in the ACK, but many endpoint fail to do so.SessionTimer: use session keep alive.-0: don‟t use-1: load from global config-2: autodetect (and using the sesskeepalive interval from the global configuration)-Other: use with the specified timeout (minutes)