12.07.2015 Views

Admin Guide - VoIP software provider

Admin Guide - VoIP software provider

Admin Guide - VoIP software provider

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Direction3: prefix. users can have discounts in for max 3 directionsTechPrefix:The server can authorize and/or route the traffic after the incoming techprefix.Sip users can have techprefixes too. this is usually common for reseller company users.If no techprefix is specified, then it will be loaded from tb_pxrules if any.Sim owners and vpc users can have a list of prefixes separated by comma.If no techprefix is specified, 111 will be inserted for incoming called numbers.If the techprefix is „-1”, then the original techprefix will be forwarded.If the techprefix is „-2”, then the original techprefix will be inserted in cdr record (but not forwarded).If the techprefix is empty, then only the normalized callednumber will be forwarded.The following techprefixes are reserved for the server: 111,222,999.Only 3 digit techprefix is allowed. If your traffic sender needs another techprefix length, you must rewrite the incoming number in the “Prefix Rules” form.Example: protcoll: sip, Type: ip, value: your traffic sender ip, rewritefrom: oldtechprefix, rewriteto: newtechprefix.Addtechprefix: we insert this number before the callednumber if the caller don‟t send its calls with tech prefixMaxLines: max concurrent calls allowedmaxlinetouse: deprecatedCurrCallCount: current running calls (usable for traffic senders)enablefakegw: if we don‟t have capacity, we can route h323 calls to a fake gateway to prevent congestionscandisablesim: if the router will check the disableduntil field from tb_simsalarmat: we can ring the sipuser if it is setforwardonbusy: telnumber where we have to forward the calls when busyforwardonnoanswer: telnumber where we have to forward the calls when we have no answerforwardalways: reroutingvoicemail: if we can send messages as emailmincreditonroute: if user has less credit, then we don‟t even route the callregtimeout: reregistration interval for sip proxiesmaxsubsfail: we set the „nopriority” field when we reach „maxsubsfail” failed callssubsfails: successive calls with duration smaller than 20 secnopriority: this gateway has lowered priority in the routing until this datenoprioritycount: successive lowered priority countminasr:minasr: minimum asr before failoveringminacl: minimum acl before failoveringmincallcount: min. Cdr records to calculate minasr and minacllastrouted: last call time (applies to caller devices and users or to callers when it is a proxy)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!