Buffalo Wild Wings

Buffalo Wild Wings1.08 DELIVERY, STORAGE, AND HANDLINGA. Store roofing panels on project site as recommended by manufacturer to minimize damage topanels prior to installation.1.09 COORDINATIONA. Coordinate sheet metal roofing with rain drainage work, flashing, trim, and construction ofsheathing, parapets, walls, and other adjoining work to provide a watertight, secure, andnoncorrosive installation.1.10 WARRANTYA. See Section 01780 - Closeout Submittals, for additional warranty requirements.B. Finish Warranty: Provide manufacturer’s special warranty covering failure of factory-appliedexterior finish on metal roof panels and agreeing to repair or replace panels that show evidenceof finish degradation, including significant fading, chalking, cracking, or peeling within specifiedwarranty period of 20 year period from date of Substantial Completion.C. Waterproofing Warranty: Provide manufacturer’s warranty for weathertightness of roofingsystem, including agreement to repair or replace roofing that fails to keep out water withinspecified warranty period of 5 years from date of Substantial Completion.PART 2 PRODUCTS2.01 MANUFACTURERSA. Acceptable Manufacturers and Products:1. Architectural Building Components: www.archmetalroof.com. Permaseam RoofingSystem.2. Petersen Aluminum Corporation: www.pac-clad.com. Snap Clad Roofing Panels.2.02 METAL PANELSA. Panel Material: G-90 galvanized steel sheet in compliance with ASTM A653.1. Gauge: 24 gauge.2. Profile: Standing seam, with minimum 1-3/4” inch seam height; concealed fastener systemfor field snap lock type installation.3. Texture: Smooth, not embossed.4. Length: Maximum possible length to minimize lapped joints.5. Width: 12 inch wide panels.6. Finish: 70% polyvinylidene flouride resin type “Kynar 500” or equivalent, AAMA 621.a. Color: Matte Black.2.03 ATTACHMENT SYSTEMA. Concealed System: Provide manufacturer's standard concealed anchor clips designed forspecific roofing system and engineered to meet performance requirements, includinganticipated thermal movement.1. Note: Roof system manufacturer to provide extended panel clips or bearing plates toaccommodate the 1” thick roof insulation and to allow direct fastening of system to plywoodsubstrate.2.04 ACCESSORIES AND MISCELLANEOUS ITEMSA. Miscellaneous Sheet Metal Items: Provide flashings, trim, moldings, closure strips, and otherexposed components of the same material, thickness, and finish as used for the roofing panels.Items completely concealed after installation may optionally be made of stainless or galvanizedsteel.B. Fasteners: Hot-dipped galvanized or stainless steel, furnished by metal panel manufacturer forspecific substrate.04-27-11 PREFORMED METAL ROOF PANELS07411 -2