Buffalo Wild Wings

Buffalo Wild WingsC. Exposed Fastenings: Unobtrusively located; consistent with design of component, exceptwhere specifically noted otherwise.D. Supply components required for anchorage of framing. Fabricate anchors and relatedcomponents of same material and finish as framing, except where specifically noted otherwise.2.05 FABRICATION - COVERINGA. Manufacture covering in one piece wherever possible, sized and configured to suit framing.B. Form covering heading of triple thickness 2 inches wide, double fold bottom hem 2 inches wide.C. Prepare covering with grommets for attachment to framing 6 inches on center.D. Turn seam edges and lock stitch.PART 3 EXECUTION3.01 EXAMINATIONA. Verify that wall substrate anchors are acceptable and are ready to receive work.3.02 PREPARATIONA. Supply items required to be embedded in masonry with setting templates, to appropriateSections.3.03 INSTALLATION - FRAMINGA. Install in accordance with manufacturer's written instructions.B. Install components plumb and level, accurately fitted, free from distortion or defects.3.04 INSTALLATION - COVERINGA. Install covering over framing members, stretched taut without creases or folds.B. Attach covering and fasten securely.END OF SECTION04-27-11 AWNINGS10536 -2