Buffalo Wild Wings

Buffalo Wild WingsSECTION 06200 - FINISH CARPENTRYPART 1 GENERAL1.01 SECTION INCLUDESA. Installation of finish millwork items furnished by Owner’s Millwork Vendor.B. Adjustable Shelf Hardware.C. Hardware and attachment accessories.1.02 RELATED SECTIONSA. Section 06110 - Rough Carpentry.B. Section 06410 - Custom Cabinets.C. Section 06415 - Countertops.D. Section 09260 - Gypsum Board Assemblies.E. Section 09900 - Paints and Coatings: Painting and finishing of millwork items.1.03 DELIVERY, STORAGE, AND HANDLINGA. Protect materials against weather and contact with damp or wet surfaces. Stack materials flatwith spacers between each bundle to provide air circulation. Provide for air circulation withinand around stacks and under temporary coverings.1.04 PROJECT CONDITIONSA. Environmental Limitations: Do not have materials delivered or install interior finish carpentrymaterials until building is enclosed and weatherproof, wet work in space is completed andnominally dry, and HVAC system is operating and maintaining temperature and relativehumidity at occupancy levels during the remainder of the construction period.PART 2 PRODUCTS2.01 WOOD-BASED COMPONENTSA. Wood fabricated from old growth timber is not permitted.2.02 LUMBER MATERIALSA. (WD1) Select White Maple: maximum moisture content of 6 percent; with vertical grain, ofquality suitable for transparent finish. Furnished by Millwork Vendor for installation under thisSection.B. (WD2) Southern Pine: No. 1, maximum moisture content of 6 percent; with vertical grain, ofquality suitable for intended use.2.03 ADJUSTABLE SHELF HARDWAREA. Standards for Adjustable Shelf Brackets: Knape & Vogt, No. KV87-36” – White.B. Adjustable Shelf Brackets: Knape & Vogt, No. KV187-18” – White.C. Accessories: Provide bracket manufacturers standard shelf rests as applicable for installationindicated on drawings. Finish: White.D. Shelves: Furnished by Millwork Vendor.04-27-11 FINISH CARPENTRY06200 -1