Buffalo Wild Wings

Buffalo Wild WingsPART 1 GENERAL1.01 SECTION INCLUDESA. Cersmic Wall, Floor and Base Tile.B. Quarry Tile Floor and Base Tile.C. Mortar and Grout Materials.D. Accessory Materials.1.02 RELATED SECTIONSA. Section 07900 - Joint Sealers.SECTION 09300 - TILEB. Section 08710 - Hardware: Thresholds at doors.C. Section 09260 - Gypsum Board Assemblies: for wall substrate materials.1.03 REFERENCE STANDARDSA. ANSI A108 Series/A118 Series/A136.1 - American National Standard Specifications for theInstallation of Ceramic Tile (Compendium).1. ANSI A108.1a - American National Standard Specifications for Installation of Ceramic Tilein the Wet-Set Method, with Portland Cement Mortar.2. ANSI A108.1b - American National Standard Specifications for Installation of Ceramic Tileon a Cured Portland Cement Mortar Setting Bed with Dry-Set or Latex Portland CementMortar.3. ANSI A108.1c - Specifications for Contractors Option: Installation of Ceramic Tile in theWet-Set Method with Portland Cement Mortar or Installation of Ceramic Tile on a CuredPortland Cement Mortar Bed with Dry-Set or Latex Portland Cement Mortar.4. ANSI A108.5 - American National Standard Specifications for Installation of Ceramic Tilewith Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar.5. ANSI A108.6 - American National Standard Specifications for Installation of Ceramic Tilewith Chemical Resistant, Water Cleanable Tile-Setting and -Grouting Epoxy.6. ANSI A108.9 - American National Standard Specifications for Installation of Ceramic Tilewith Modified Epoxy Emulsion Mortar/Grout.7. ANSI A108.10 - American National Standard Specifications for Installation of Grout inTilework.8. ANSI A118.4 - American National Standard Specifications for Latex-Portland CementMortar.9. ANSI A118.7 - American National Standard Specifications for Polymer Modified CementGrouts for Tile Installation.10. ANSI A118.8 - American National Standard Specifications for Modified Epoxy EmulsionMortar/Grout.B. TCA (HB) - Handbook for Ceramic Tile Installation; Tile Council of North America, Inc.1.04 SUBMITTALSA. See Section 01300 - Administrative Requirements, for submittal procedures.B. Maintenance Data: Include recommended cleaning methods, cleaning materials, stain removalmethods, and polishes and waxes.1.05 QUALITY ASSURANCEA. Maintain one copy of TCA Handbook and ANSI A108 Series/A118 Series on site.B. Installer Qualifications: Company specializing in performing tile installation, with minimum of 5years of documented experience.04-27-11 TILE09300 -1