Buffalo Wild Wings

Buffalo Wild Wings4. Do not apply paint in precipitation, fog or mist, when relative humidity exceeds 85 percent,or at temperatures less than 5 degrees F. above dew point, or to damp or wet surfaces.B. Do not apply paint systems in areas where dust is being generated.C. Do not apply coatings until moisture content of surface is within limitations recommended bypaint manufacturer. Test with a moisture meter.D. Provide minimum lighting level of 80 ft candles measured mid-height at substrate surface.1.09 EXTRA MATERIALSA. See Section 01600 - Product Requirements, for additional provisions.B. Extra Materials: Furnish (1) one gallon of each color for all major substrates for use by Owner.1. Label each container with substrate and color in addition to the manufacturer's label.2. Before Substantial Completion of Work, deliver extra materials to Project and store wheredirected.PART 2 PRODUCTS2.01 MANUFACTURERSA. Primers and Paints: Sherwin Williams Co. www.sherwin-williams.comB. Transparent Finishes: Minwax Co. www.minwax.com2.02 COLORSA. All color numbers are from Sherwin Williams unless noted otherwise.1. (C1): Color to match Ralph Lauren NA-36, “Steeple Chase”, Satin,SW: Color Accents Custom Formula:(B1)2Y41, (W1)10/32, (N1)2Y13+1, (R2)9/32, (Y3)41+012. (C2): SW #6328, “Fireweed”, Satin3. (C3): SW #6683, “Bee”, Satin4. (C4): SW #6991, “Black”, Flat5. (C5): SW #6991, “Black Magic”, Satin6. (C6): SW #7006, “Extra White”, Satin7. (C7): SW #6683, “Bee”, Gloss8. (C8): SW #6991, “Black Magic”, Semi-Gloss9. (C9): SW #7055, “Enduring Bronze”, Semi-GlossColor to match Face Brick (FBR1) color, refer to Section 04810.10. (C10): SW #6117, “Smoky Topaz”, Semi-GlossColor to match (EIFS1) color, refer to Section 07240.11. (C11): SW #7055, “Enduring Bronze”, Semi-Gloss Epoxy.12. (C12): SW #7006, “Extra White”, Semi-Gloss Epoxy13. (C13): SW #6898, “Social Butterfly”, Satin, Color match for (EIFS2).14. (C14): Clear Finish, Polyurethane Satin, Wood Doors.2.03 MATERIALSA. Material Compatibility: Provide primers, and finish-coat materials that are compatible with oneanother, with factory-applied primers and with the substrates indicated under conditions ofservice and application, as demonstrated by manufacturer based on testing and field experience.B. Material Quality: Provide manufacturer's specified paint material of the various coating typesthat are factory formulated and recommended by manufacturer for application indicated. Paintmaterial containers not displaying manufacturer's product identification are not acceptable.04-27-11 PAINTS AND COATINGS09900 -3