Buffalo Wild Wings

Buffalo Wild WingsE. At deck openings from 6 inches to 10 inches in size, provide 2 x 2 x 1/4 inch steel anglereinforcement. Place angles perpendicular to flutes; extend minimum two flutes beyond eachside of opening and fusion weld or mechanically attach to deck at each flute.F. Where deck changes direction, install 6 inch minimum wide sheet steel cover plates, of samethickness as deck. Fusion weld 12 inches on center maximum.G. At openings between deck and walls, columns, and openings, provide sheet steel closures andangle flashings to close openings.H. Close openings above walls and partitions perpendicular to deck flutes with single row of foamcell closures.I. Position roof drain pans with flange bearing on top surface of deck. Fusion weld at each deckflute.J. Immediately after welding deck and other metal components in position, coat welds, burnedareas, and damaged surface coating, with touch-up primer.3.03 FIELD QUALITY CONTROLA. Welded Connections: Visually inspect 100 percent of connections to ensure that all plies ofconnected parts are in complete contact.END OF SECTION04-27-11 STEEL DECK05310 -3