Buffalo Wild Wings

3. Mechanical Drawings are diagrammatic and are intended to show approximatelocation only. Placement of mechanical equipment and devices shall not interferewith locations or clearances of other trades’ materials or equipment.4. Dimensions given on the Drawings shall take precedence over scaleddimensions. Dimensions, whether given in figures or scaled, shall be verified inthe field.5. Contractor shall verify that the equipment to be furnished under Contract will fitwithin the available space.6. Notify the Architect and Engineer of any discrepancies between Electrical,Architectural and Mechanical Drawings.7. Verify items such as door swings, window locations, casework, etc., beforeinstalling any mechanical equipment or devices. All devices conflicting with othertrade’s work due to lack of coordination shall be relocated at no additional cost tothe Owner.D. The following terms used in the Drawings and Specifications shall be defined as follows:1. Contractor: Shall mean Mechanical Contractor or any of their Subcontractors.2. Work: Shall mean labor and/or materials of the Mechanical Contractor or any oftheir Subcontractors.3. Furnish: Shall mean purchase, submit for Engineer approval, coordinate withContract Documents and deliver to site in new, undamaged condition.4. Install: Shall mean to schedule for delivery, deliver or have delivered to the site,store as directed, protect from damage, set in place, make all necessary finalconnections, test as required and turn over to the Owner in full operatingcondition.5. Provide: Shall mean furnish and install.6. Connect: Shall mean to bring mechanical service and/or low voltage controlwiring to equipment, make all final connections, provide all necessarymiscellaneous materials required and do final check out to ensure properequipment connections.E. CAD and Drawing Files:1. Mechanical CAD drawings by Engineer of Record for this Project are instrumentsof Engineer of Record for use solely with respect to this Project. During thecourse of the implementation of the Project, and with Engineer of Recordapproval, copies may be obtained of CAD drawings for the preparation of ShopDrawings. These CAD drawings shall not be used on other projects, for additionsto this Project, or for completion of this Project by others. Any revisions,additions and/or deletions to these CAD drawings, either intentional orunintentional, shall be made at the full risk of the person(s) making suchrevisions, additions and/or deletions. Such person(s) shall hold harmless andindemnify Engineer of Record of any and all responsibilities and liabilities.2. CAD drawings files of Architectural floor plans, elevations, sections, etc, shall berequested directly from the Architect.06/25/09 MECHANICAL GENERAL CONDITIONS15010-2