Buffalo Wild Wings

Buffalo Wild WingsSECTION 09511 - SUSPENDED ACOUSTICAL CEILINGSPART 1 GENERAL1.01 SECTION INCLUDESA. Suspended metal grid ceiling system.B. Acoustical units.C. Egg Crate Ceiling Panel.1.02 REFERENCESA. ASTM A 641, Specification for Zinc-Coated (Galvanized) Carbon Steel Wire.B. ASTM C 635 - Standard Specification for the Manufacture, Performance, and Testing of MetalSuspension Systems for Acoustical Tile and Lay-in Panel Ceilings.C. ASTM C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems forAcoustical Tile and Lay-in Panels.D. ASTM E 580 - Standard Practice for Application of Ceiling Suspension Systems for AcousticalTile and Lay-in Panels in Areas Requiring Seismic Restraint.E. ASTM E 1264 - Standard Classification for Acoustical Ceiling Products.1.03 COORDINATIONA. Coordinate layout and installation of acoustical panels and suspension system with otherconstruction that penetrates ceilings or is supported by them, including light fixtures, HVACequipment, fire-suppression system, and partition assemblies.PART 2 PRODUCTS2.01 ACOUSTICAL UNITSA. Manufacturers:1. USG Corporation: www.usg.com.B. Acoustical Units - General: ASTM E 1264, Class A.C. (ACT1) Acoustical Panels: Vinyl faced gypsum board, with the following characteristics:1. Manufacturer and Product: USG ClimaPlus Vinyl, Stipple 3270.2. Size: 24 x 48 inches.3. Thickness: 1/2 inches.4. Composition: Vinyl facing bonded to smooth gypsum board.5. Edge: Square.6. Surface Color: White.7. Surface Pattern: Fine textured, non-perforated.D. (ACT2) Acoustical Panels: Vinyl faced gypsum board, with the following characteristics:1. Manufacturer and Product: USG ClimaPlus Vinyl, Stipple 3260.2. Size: 24 x 24 inches.3. Thickness: 1/2 inches.4. Composition: Vinyl facing bonded to smooth gypsum board.5. Edge: Square.6. Surface Color: White.7. Surface Pattern: Fine textured, non-perforated.04-27-11 SUSPENDED ACOUSTICAL CEILINGS09511 -1