Buffalo Wild Wings

SECTION 16500 - LIGHTINGPART 1. - GENERAL1.1 SUMMARYA. Section Includes: Install fixtures shown on Drawings.PART 2. - PRODUCTSNot UsedPART 3. - EXECUTION3.1 INSTALLATIONA. General Requirements:3.2 FIXTURE MOUNTING1. Remove manufacturer labels from exterior of fixtures, do not remove any UL ormaximum wattage labels .2. Install Fixtures when the work of other trades in the area is substantiallycomplete, to avoid damage or defacement after installation. Fixtures shall not beinstalled on ceilings until ceiling finishes are complete, except fixtures may beinstalled on exposed T-bar ceilings after T-bars are installed and before tileinstallation.3. Coordinate fixture locations with the ceiling installation and install fixtures in auniform pattern to tiles or exposed grids. Fixtures shall be symmetrically spacedwith rows in alignment and parallel with the building features. Measurementsshall be taken from the Architectural Drawings.4. Directional fixtures shall be properly aimed and aligned as directed by the Ownerrepresentative.A. General Requirements:1. Surface fixtures, other than fluorescent type, shall be securely fastened to outletbox.2. Recessed fixtures, except those installed within an exposed grid type ceiling,shall be supported from building structural members or from concealed steelframing channels 1-1/2 inches or larger. No recessed fixtures shall be supportedfrom ceiling tiles.3. Individually mounted fluorescent fixtures shall be supported within 12 inches ofeach end of fixture.3.3 SUPPORTS AND FASTENINGA. For Fixtures Not In Exposed T-Bar Grid Ceilings: Fixture supports, or outlet boxes usedto support fixtures, shall be securely fastened to building structural members or toconcealed steel ceiling framing channels 1-1/2 inches or larger. Fixture hanging rodsshall be of adequate dimensions to support fixture and shall be not less than 3/8 inchdiameter. Fixture supports shall be fastened to structure as shown on drawing details.B. For Fixtures in Exposed T-Bar Grid Ceilings: Fixtures shall be supported as follows:LIGHTING16500-1