Buffalo Wild Wings

Buffalo Wild WingsSECTION 09650 - RESILIENT FLOORINGPART 1 GENERAL1.01 SECTION INCLUDESA. Vinyl base.1.02 REFERENCESA. ASTM F 1861 - Standard Specification for Resilient Wall Base.PART 2 PRODUCTS2.01 MATERIALSA. (RB) Resilient Base; ASTM F 1861, Type TV, vinyl, thermoplastic; top set Style A, covedbase.1. Height: 6 inch.2. Thickness: 0.125 inch thick.3. Color: Black.4. Manufacturers:a. BurkeMercer Flooring Products: www.burkemercer.comb. Johnsonite, Inc: www.johnsonite.comc. Roppe Corp: www.roppe.comd. Armstrong: www.ceilings.come. VPI: www.vpicorp.com2.02 ACCESSORIESA. Resilient Base Adhesive: As recommended by material manufacturer for specific material,location and intended use.1. VPI No. 600 Acrylic Copolymer Wall Base Adhesive or comparable product from the otherspecified base manufacturers.PART 3 EXECUTION3.01 EXAMINATIONA. Verify that surfaces are smooth and flat and are ready to receive vinyl base.3.02 INSTALLATION - BASEA. Fit joints tightly and make vertical. Maintain minimum dimension of 18 inches between joints.B. Miter internal corners. At external corners, use pre-molded units. At exposed ends, use premoldedunits.C. Install base on solid backing. Bond tightly to wall and floor surfaces.D. Scribe and fit to door frames and other interruptions.3.03 CLEANINGA. Immediately after installation, remove excess adhesive from floor, base, and wall surfaceswithout damage.END OF SECTION04-27-11 RESILIENT FLOORING09650 -1