12.07.2015 Views

Buffalo Wild Wings

Buffalo Wild Wings

Buffalo Wild Wings

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong>PART 1 GENERAL1.01 SECTION INCLUDESSECTION 07720 - ROOF ACCESSORIESA. Roof hatches, ladder post and safety railing.1.02 RELATED SECTIONSA. Section 05310 - Steel Deck.B. Section 07535 – Mechanically Attached Membrane Roofing.C. Section 09900 – Painting and Coatings.1.03 DELIVERY, STORAGE, AND HANDLINGA. Store products in manufacturer's unopened packaging until ready for installation.B. Store products under cover and elevated above grade.PART 2 PRODUCTS2.01 ROOF HATCHESA. Manufacturers - Roof Hatches: Bilco Co.: www.bilco.com1. Product: Bilco Type S Roof Hatch.B. Roof Hatch: Factory-assembled steel frame and cover, complete with operating and releasehardware.1. Style: Provide flat metal covers unless otherwise indicated.2. Mounting: Provide frames and curbs suitable for mounting conditions indicated on thedrawings.3. Size(s):a. For Ladder Access: Single leaf; 2’-6” x 3’-0”.C. Frames/Curbs: One-piece curb and frame with integral cap flashing to receive roof flashings;extended bottom flange to suit mounting.1. Material: Galvanized steel, 14 gage, 0.0747 inch thick.2. Finish: Factory prime paint.3. Insulation: 1 inch rigid fiber board, located on outside face of curb.4. Curb Height: 12 inches from finished surface of roof, minimum.D. Metal Covers: Flush, insulated, hollow metal construction.1. Capable of supporting 40 psf live load.2. Material: G-90, galvanized steel; outer cover 14 gage, 0.0747 inch thick, liner 22 gage,0.03 inch thick.3. Finish: Factory prime paint.4. Insulation: Concealed 1 inch rigid glass fiber.5. Gasket: Neoprene, continuous around cover perimeter.E. Hardware: Steel, zinc coated and chromate sealed, unless otherwise indicated or required bymanufacturer.1. Lifting Mechanisms: Compression or torsion spring operator with shock absorbers thatautomatically opens upon release of latch; capable of lifting covers despite 10 psf load.2. Hinges: Heavy duty pintle type.3. Hold open arm with vinyl-coated handle for manual release.4. Latch: Upon closing, engage latch automatically and reset manual release.5. Manual Release: Pull handle on interior.6. Locking: Padlock hasp on interior.04-27-11 ROOF ACCESSORIES07720 -1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!