Buffalo Wild Wings

Buffalo Wild WingsSECTION 08211 - FLUSH WOOD DOORSPART 1 GENERAL1.01 SECTION INCLUDESA. Flush wood doors; non-rated.1.02 RELATED SECTIONSA. Section 06200 - Finish Carpentry.B. Section 08110 – Hollow Metal Doors and Frames.C. Section 08710 - Door Hardware.D. Section 09900 – Paints and Coatings: for field finishing of doors.1.03 REFERENCESA. AWI/AWMAC (QSI) - Architectural Woodwork Quality Standards Illustrated; ArchitecturalWoodwork Institute and Architectural Woodwork Manufacturers Association of Canada.B. ANSI A208.1: Particleboard.C. DHI-A115-W: Wood Door Hardware Standards, Hardware Preparation.D. DHI-WDHS-3: Recommended Locations for Architectural Hardware for Wood Flush Doors.1.04 SUBMITTALSA. See Section 01300 - Administrative Requirements for submittal procedures.B. Product Data: Indicate door core materials and construction; veneer species, type andcharacteristics.C. Shop Drawings: Illustrate door opening criteria, elevations, sizes, types, swings, undercutsrequired, special beveling, special blocking for hardware, factory machining criteria, factoryfinishing criteria, identify cutouts for glazing.1.05 QUALITY ASSURANCEA. Perform work in accordance with AWI Architectural Woodwork Quality Standards Illustrated,Section 1300, Custom Grade.B. Manufacturer: Company specializing in manufacturing the products specified in this sectionwith minimum three years of documented experience.1.06 DELIVERY, STORAGE, AND PROTECTIONA. Package, deliver and store doors in accordance with specified quality standard.B. Accept doors on site in manufacturer's packaging. Inspect for damage.C. Protect doors with resilient packaging sealed with heat shrunk plastic. Do not store in damp orwet areas; or in areas where sunlight might bleach veneer. Seal top and bottom edges withtinted sealer if stored more than one week. Break seal on site to permit ventilation.1.07 PROJECT CONDITIONSA. Coordinate the work with door opening construction, door frame and door hardware installation.B. Environmental Limitations: Do not deliver or install doors until spaces are enclosed and weathertight, wet work in spaces is complete and dry, and HVAC system is operating and maintainingambient temperature and humidity conditions at occupancy levels during the remainder of theconstruction period.04-27-11 FLUSH WOOD DOORS08211 -1