Buffalo Wild Wings

Buffalo Wild WingsSECTION 06415 - COUNTERTOPSPART 1 GENERAL1.01 SECTION INCLUDESA. Installation of countertops for manufactured casework furnished by Owner’s Millwork Vendor.B. Wall-hung counters and vanity tops.1.02 REFERENCESA. ANSI A208.2 - American National Standard for Medium Density Fiberboard for Interior Use.B. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.C. ISSFA-2 - Classification and Standards for Solid Surfacing Material; International Solid SurfaceFabricators Association.D. NEMA LD 3 - High-Pressure Decorative Laminates.1.03 SUBMITTALSA. See Section 01300 - Administrative Requirements, for submittal procedures.B. Shop Drawings: Indicate materials, component profiles and elevations, assembly methods, jointdetails, fastening methods, and schedule of finishes.C. Millwork Vendor is contracted direct by Owner. Millwork Vendor will submit shop drawings toGeneral Contractor for dimension verification.1.04 QUALITY ASSURANCEA. Installer Qualifications: Qualified installer for solid surface materials that is trained and certifiedby manufacturer for the installation of the specified products.PART 2 PRODUCTS2.01 COUNTERTOP ASSEMBLIESA. Countertops furnished by Owner’s Millwork Vendor.B. Plastic Laminate Countertops: High pressure decorative laminate sheet bonded to substrate.1. Laminate Sheet, Unless Otherwise Indicated: NEMA LD 3 Grade HGS, 0.048 inch nominalthickness.a. Surface Burning Characteristics: Flame spread 25, maximum; smoke developed 450,maximum; when tested in accordance with ASTM E 84.b. NSF approved for food contact.c. Finish: Matte or suede, gloss rating of 5 to 20.d. Surface Color and Pattern: (PLAM2) Wilsonart # 4884-38, Flame Soapstone,Standard finish.2. Laminate Backing Sheet: 0.020 inch Backing Sheet grade, undecorated plastic laminate.3. Back and End Splashes: Same material, same construction.B. Solid Surfacing Countertops: Solid surfacing sheet or plastic resin casting over continuoussubstrate.1. Flat Sheet Thickness: 1/2 inch, minimum.04-27-11 COUNTERTOPS06415 -1