12.07.2015 Views

Buffalo Wild Wings

Buffalo Wild Wings

Buffalo Wild Wings

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong>SECTION 09260 - GYPSUM BOARD ASSEMBLIESPART 1 GENERAL1.01 SECTION INCLUDESA. Metal framing.B. Metal framing components for suspended gypsum board ceilings.C. Standard gypsum board.D. Mold resistant gypsum board.E. Cement backer board.F. Joint treatment and accessories.1.02 RELATED SECTIONSA. Section 05400 - Cold Formed Metal Framing: Exterior wall wind-load-bearing metal studframing and related soffit framing.B. Section 06100 – Rough Carpentry: Exterior load bearing wood stud framing and sheathing.C. Section 07212 – Board and Batt Insulation: for fiberglass insulation used as acoustic insulation.1.03 REFERENCESA. ANSI A108.11 - American National Standard for Interior Installation of Cementitious BackerUnits.B. ANSI A118.9 - American National Standard Specifications for Cementitious Backer Units.C. ASTM A 641 - Specification for Zinc-Coated (Galvanized) Carbon Steel Wire.D. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) orZinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.E. ASTM C 36/C 36M - Standard Specification for Gypsum Wallboard.F. ASTM C 475/C 475M - Standard Specification for Joint Compound and Joint Tape for FinishingGypsum Board.G. ASTM C 645 - Standard Specification for Nonstructural Steel Framing Members.H. ASTM C 754 - Standard Specification for Installation of Steel Framing Members to ReceiveScrew-Attached Gypsum Panel Products.I. ASTM C 840 - Standard Specification for Application and Finishing of Gypsum Board.J. ASTM C 1002 - Standard Specification for Steel Self-Piercing Tapping Screws for theApplication of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs.K. ASTM C 1396/C 1396M - Standard Specification for Gypsum Board.L. ASTM D 3273 - Standard Test Method for Resistance to Growth of Mold on the Surface ofInterior Coatings in an Environmental Chamber.M. ASTM E 72 - Standard Test Methods of Conducting Strength Tests of Panels for BuildingConstruction.N. GA-600 - Fire Resistance Design Manual; Gypsum Association.04-27-11 GYPSUM BOARD ASSEMBLIES09260 -1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!