Buffalo Wild Wings

Buffalo Wild WingsPART 3 EXECUTION3.01 EXAMINATIONA. Verify that project conditions are suitable before beginning installation of frames.B. Correct unsatisfactory condition before preceding with installation.3.02 INSTALLATIONA. Install frames plumb, level, rigid, and in true alignment as recommended in ANSI A250.11 andDHI A115.1G.B. Install doors plumb and in true alignment and fasten to achieve the maximum operationaleffectiveness and appearance of the unit. Maintain clearances specified in ANSI A250.8 andNFPA 80 whichever is more restrictive.C. Fill welded wrap-around frames in masonry construction with grout as masonry is laid-up.Brace or fasten frame in such a way to prevent pressure of the grout from deforming frame.1. Mix grout to provide 4 inch maximum consistency and hand trowel into place.2. Do not use grout mixed to thin "pumpable" consistency.D. If additives are used in masonry or plaster work during cold weather, field coat the inside ofsteel frames with a bituminous compound to prevent corrosion.E. Install doors plumb and in true alignment and fasten to achieve the maximum operationaleffectiveness and appearance of the unit. Maintain clearances specified. Shim as indicated inDHI A115.1G and SDI 122.F. Install hardware in accordance with hardware manufacturer's recommendations and templates.Consult DHI A115.1G and ANSI A250.6 as necessary.G. Install door silencers shortly before substantial completion.3.03 ADJUST AND CLEANA. Adjust doors for proper operation, free from binding or other defects.B. Clean and restore soiled surfaces. Remove scraps and debris, and leave site and a cleancondition.END OF SECTION04-27-11 HOLLOW METAL DOORS AND FRAMES08110 -4