Buffalo Wild Wings

Buffalo Wild WingsPART 1 GENERAL1.01 SECTION INCLUDESSECTION 05400 - COLD FORMED METAL FRAMINGA. Formed steel stud exterior wall framing and bracing.1.02 RELATED REQUIREMENTSA. Section 04810 - Unit Masonry Assemblies.B. Section 05120 - Structural Steel.C. Section 05310 - Steel Deck.D. Section 09260 - Gypsum Board Assemblies: Lightweight, non-load bearing metal stud framing.1.03 REFERENCE STANDARDSA. AISI SG02-1 - North American Specification for the Design of Cold-Formed Steel StructuralMembers; American Iron and Steel InstituteB. AISI SG-971 - Specification for the Design of Cold-Formed Steel Structural Members; AmericanIron and Steel InstituteC. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and SteelHardwareD. ASTM A 123/A 123M - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Ironand Steel Products.E. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) orZinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.F. ASTM C 955 - Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs,Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products andMetal Plaster Bases.G. AWS D1.1/D1.1M - Structural Welding Code - Steel; American Welding Society.H. SSPC-Paint 20 - Zinc-Rich Primers (Type I, "Inorganic," and Type II, "Organic"); Society forProtective Coatings.1.04 SUBMITTALSA. See Section 01300 - Administrative Requirements, for submittal procedures.B. Product Data: Provide data on standard framing members; describe materials and finish,product criteria, limitations.C. Shop Drawings: Show layout, spacing, sizes, thicknesses, and types of cold-formed metalframing; fabrication; and fastening and anchorage details, including mechanical fasteners.Show reinforcing channels, opening framing, supplemental framing, strapping, bracing, bridging,splices, accessories, connection details, and attachment to adjoining work.D. Welders Certificates: Certify welders employed on the Work, verifying AWS qualification withinthe previous 12 months.1.05 QUALITY ASSURANCEA. Calculate structural properties of framing members in accordance with requirements of AISINorth American Specification for the Design of Cold-Formed Steel Structural Members.04-27-11 COLD FORMED METAL FRAMING05400 -1