Buffalo Wild Wings

Buffalo Wild WingsPART 1 GENERAL1.01 SECTION INCLUDESA. Metal furring and lathing.SECTION 09220 – PORTLAND CEMENT PLASTER (STUCCO)B. Portland cement plaster system (Stucco).C. Smooth and special rendered surface finish.1.02 RELATED SECTIONSA. Section 06100 - Rough Carpentry.B. Section 07260 - Air Barriers.C. Section 07920 - Joint Sealers.D. Section 09260 - Gypsum Board Assemblies.E. Section 09900 - Paints and Coatings.1.03 SUBMITTALSA. See Section 01300 - Administrative Requirements, for submittal procedures.B. Product Data: Submit data on plaster materials, characteristics and limitations of productsspecified.C. Maintenance Data: Include maintenance procedures, recommended maintenance materials,and suggested schedule for cleaning.D. Samples: Submit two samples, 12 x 12 inch in size illustrating finish color and texture to matchexisting material.1.04 REFERENCESA. ASTM C150 – Portland CementB. ASTM C206 – Finishing Hydrated LimeC. ASTM C932 – Bonding Compounds for adhering plaster to concrete or concrete unit masonryD. ASTM C926 – Standard specification for application of Portland Cement based PlasterE. ASTM C897 – Aggregate for Job-Mixed Portland Cement Based PlastersF. ASTM C1063 – Specifications for installation of lathing and furring to receive interior andexterior Portland Cement PlasterG. PCA (Portland Cement Association) – Portland Cement Plaster (Stucco) ManualH. ACI (American Concrete Institute) ACI 524R – “Guide to Portland Cement Plastering”1.05 QUALITY ASSURANCEA. Perform work in accordance with PCA Plaster (Stucco) Manual and applicable manufacturer’sperformance guidelines.1.06 SYSTEM DESCRIPTIONA. Fabricate vertical elements to limit finish surface to 1/180 deflection under lateral point load of100 lbs.04-27-11 PORTLAND CEMENT PLASTER (STUCCO)09220 -1