Buffalo Wild Wings

Buffalo Wild WingsB. Verify roofing termination and base flashings are in place, sealed, and secure.3.02 PREPARATIONA. Install starter and edge strips, and cleats before starting installation.B. Back paint concealed metal surfaces with protective backing paint to a minimum dry filmthickness of 15 mil.3.03 INSTALLATIONA. Secure flashings in place using concealed fasteners. Use exposed fasteners only wherepermitted.B. Apply plastic cement compound between metal flashings and felt flashings.C. Fit flashings tight in place. Make corners square, surfaces true and straight in planes, and linesaccurate to profiles.D. Seal metal joints watertight.3.04 SCHEDULEA. Scuppers and Downspouts: 20 gauge.B. Coping, Cap, Parapet, Sill and Ledge Flashings: 24 gauge.C. Counterflashing at Roofing Terminations (over roofing base flashings): 24 gauge.D. Counterflashing at Curb-Mounted Roof Items: 24 gauge.E. Hook strips and keepers: 22 gauge.F. Other sheet metal work: 24 gauge.END OF SECTION04-27-11 SHEET METAL FLASHING AND TRIM07620 -3