Draft Detailed Project Report
Rohtak
Rohtak
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak<br />
Production<br />
On the basis of focus sector for the proposed TC, following are the machines identified for<br />
production/ manufacturing activities at the proposed TC. The list will be further validated by<br />
technology partner for finalisation and to initiate procurement. The budgetary cost (landed cost) of<br />
these machines is approximately estimated at around INR 12.28 Cr. The TC will provide plastic mould<br />
support to shoe manufacturers in the catchment area and machining support for fasteners and auto<br />
ancillaries. The growing concerns related to climate change, energy security, scarcity of natural<br />
resources and increasing environmental regulations is putting more emphasis on sustainable<br />
production activities in manufacturing process. Due care therefore has been taken during the<br />
identification of machines for production systems and associated services, processes, plants and<br />
equipment in the TC. This will make the TC environmental friendly and energy efficient and would be<br />
better equipped to manufacture more products with less material, energy and waste.<br />
Table 27: Proposed list of machines for production/ manufacturing activities<br />
S.N. Machine Size<br />
Numb<br />
er<br />
Value<br />
(lacs)<br />
Total<br />
Cost<br />
Advanced Machines<br />
1 CNC VMC-3 axis 0.8mx0.6mx0.5m 2 75 150<br />
2 CNC Lathe Dia 250x600mm 1 35 35<br />
3 CNC Wire EDM 500x500x400 mm 1 100 100<br />
4 CNC EDM Die Sinking 500x500 mm 1 75 75<br />
5 Injection Moulding machine 200 T 1 50 50<br />
6 Additive Manufacturing/3D printing/RPT 200 T 1 50 50<br />
7 CNC Coordinate Measuring Machine 800mmx600 mm 1 100 100<br />
Conventional Machines<br />
8 Conventional Milling 1.2mx0.5mx0.4 m 2 25 50<br />
9 Conventional Lathe Dia400x1200mm 2 20 40<br />
Supporting machines and Labs<br />
10 Radial drill machine 63mm 1 10 10<br />
11 Surface Grinding 800x400 mm 2 30 60<br />
12 Cyl Grinding Dia 200x750mm 2 40 80<br />
13 Hydraulic press 100 T 1 50 50<br />
14 Tools & Tooling Systems 60<br />
15<br />
16<br />
Work Benches with Bench Vices &<br />
Assembly Kits 10 1 10<br />
Auxiliary Eqpts (Drill m/c, Bench grinder,<br />
Surface Plates etc.) 1 lot 20 20
Change language